User Manual Cellink AC charger

TIP

The main Cellink battery is meant to be installed and charged inside the vehicle.
Alternatively, you can charge the main Cellink battery using the optional AC charger.

1. Switch off the engine of your car.

2. Remember the switch position of the main Cellink battery.

3. Slide the switch to centre position to power OFF the main Cellink battery.

4. Disconnect all cables from the main Cellink battery.

5. Connect the AC charger to the [INPUT] connector of main Cellink battery.

6. Select the switch on the main Cellink battery to LOW/ FIX*.

7. Switch ON the power to the AC charger.

8. The LED on the AC charger will turn green when the main Cellink is fully charged.

9. Return the main Cellink battery to the car and reconnect all cables.

10. Select the same switch position as item 3.

NOTE

If you have NEO Extended battery, it has to be connected to the main Cellink battery to enable the charging using the AC charger. NEO Extended battery is unable to be charged as a standalone unit.
* AC charger is charging at low current of approximately 4.5A hence the time to charge from 0% to 100% is around 100 minutes. If you have NEO Extended 7 added, the charging time is around 200 minutes.

Article ID: 16
Created: July 6, 2022
Last Updated: October 8, 2022

Online URL: https://help.wowgadgets.com.sg/article/user-manual-cellink-ac-charger.html